Smart temperature sensor
Automatically regulates output in cold water which prevents excessive wear and tear on your cell, helping to reduce costs.
Hydroxinator iQ pH
Informations produit
Réf. WW000196PHDescription du produit
Advanced mineral chlorinator with integrated pH management for smarter, balanced water.
The Hydroxinator® iQ pH retains all the intelligent features of the standard iQ version, but adds a premium pH sensor and automatic acid dosing to maintain perfect balance. It lets the system self-regulate both sanitation and acidity, further reducing manual intervention.
Spécifications
- Model: Mid
- Cell Output : 25gm/h
- Maximum Average Pool Size: 75,000L (based on a mild weather climate, please adjust for cooler or hotter)
- Recommended Salinity: 4,000ppm
- Plumbing Capacity: 40mm / 50mm
- Operating Mode(s): Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs.
- Equipment Control: Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222)
- Cell Protection: Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear.
- Warning Indicators: "Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal.
- Power Supply / Operating Power: 197W; 110-240 VAC; 50/60Hz
- Power Pack Dimensions (H x W x D): 370mm x 320mm x 100mm
- Cell Dimensions (H x W x D): 160mm × 320mm × 110mm
Informations produit
- Brand: zodiac-nz
- SKU: WW000196PH
Informations produit
Variable-speed pump control
Provides greater control over pump speed and helps reduce energy consumption. The Hydroxinator can communicate to Zodiac RS485 enabled pumps.
iAquaLink enabled
Features a built-in WiFi chip that allows you to monitor and control remotely, for complete control at your fingertips anytime, anywhere.
Automated water chemistry control
Monitors and manages your basic water parameters, keeping pH levels in balance and perfectly regulated. Upgrades available for chlorine management.
Note: Acid should be diluted at least 1:1 (water:acid) however it is also acceptable to dilute as heavily as 2:1 (water:acid) depending on your preferred maintenance routine.
| Spécification | WW000196PH | WW000197PH |
|---|---|---|
Model | Mid | Large |
Cell Output | 25gm/h | 35gm/h |
Maximum Average Pool Size | 75,000L (based on a mild weather climate, please adjust for cooler or hotter) | 100,000L (based on a mild weather climate, please adjust for cooler or hotter) |
Recommended Salinity | 4,000ppm | 4,000ppm |
Plumbing Capacity | 40mm / 50mm | 40mm / 50mm |
Operating Mode(s) | Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs. | Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs. |
Equipment Control | Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222) | Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222) |
Cell Protection | Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear. | Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear. |
Warning Indicators | "Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal. | "Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal. |
Power Supply / Operating Power | 197W; 110-240 VAC; 50/60Hz | 197W; 110-240 VAC; 50/60Hz |
Power Pack Dimensions (H x W x D) | 370mm x 320mm x 100mm | 370mm x 320mm x 100mm |
Cell Dimensions (H x W x D) | 160mm × 320mm × 110mm | 160mm × 320mm × 110mm |
Model
WW000196PH
Mid
WW000197PH
Large
Cell Output
WW000196PH
25gm/h
WW000197PH
35gm/h
Maximum Average Pool Size
WW000196PH
75,000L (based on a mild weather climate, please adjust for cooler or hotter)
WW000197PH
100,000L (based on a mild weather climate, please adjust for cooler or hotter)
Recommended Salinity
WW000196PH
4,000ppm
WW000197PH
4,000ppm
Plumbing Capacity
WW000196PH
40mm / 50mm
WW000197PH
40mm / 50mm
Operating Mode(s)
WW000196PH
Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs.
WW000197PH
Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs.
Equipment Control
WW000196PH
Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222)
WW000197PH
Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222)
Cell Protection
WW000196PH
Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear.
WW000197PH
Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear.
Warning Indicators
WW000196PH
"Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal.
WW000197PH
"Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal.
Power Supply / Operating Power
WW000196PH
197W; 110-240 VAC; 50/60Hz
WW000197PH
197W; 110-240 VAC; 50/60Hz
Power Pack Dimensions (H x W x D)
WW000196PH
370mm x 320mm x 100mm
WW000197PH
370mm x 320mm x 100mm
Cell Dimensions (H x W x D)
WW000196PH
160mm × 320mm × 110mm
WW000197PH
160mm × 320mm × 110mm
Brochure
- Télécharger
MagnaPool Hydroxinator iQ - Datasheet
Manual
- Télécharger
MagnaPool Hydroxinator iQ pH - Manual